VM9020TS
20
CD/MP3/WMA OPERATION
Instructions for Insert/Eject, Play/Pause, Stopping Playback,
Track Selection, Fast Forward/Fast Reverse, Scan, and
Random Play
are the same for DVD, CD and MP3 operation.
Please see the DVD Player Operation section for information
about these topics.
NOTE: CD-R and CD-RW will not play unless the
recording session is closed.
The file naming formats listed below are compatible with this
unit:
•
ISO 9660 – file name: 12 characters, file extension: 3
characters
•
ISO 9660 – file name: 31 characters, file extension: 3
characters
•
Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly.
CD Player User Interface
The on-screen indicators and touch key areas for CD
playback are outlined below.
1.
Current track and total number of tracks on disc
2.
Elapsed playing time
3.
Touch to activate/deactivate Repeat play mode
4.
Touch to activate/deactivate Scan mode
5.
Touch to activate/deactivate Random mode
6.
Current time
7.
Disc Title
8.
Track Title
9.
Touch to return to MAIN MENU
10.
: Touch to play/pause disc playback
11.
: Touch to stop disc playback
12.
: Touch to move to previous track
13.
: Touch to move to next track
14.
: Touch to rewind current track
15.
: Touch to fast forward current track
16. Front Zone Playing Mode
17. Rear Zone Playing Mode
18. Encoding method of media being played.
19. "Surround Music" effect selected.
MP3/WMA Discs
This player allows you to playback MP3 files recorded on CD-
ROM, CD-R, and CD-RW. For CD-RW discs, please make
sure it is formatted using the full method and not the quick
method to prevent illegal disc operation.
Use the following settings when compressing audio data for
your MP3 disc:
•
Transfer Bit Rate: 320kbps
•
Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the
sequence of the “Root’ directory.
Use the numeric keypad (29) on the remote control to access
files directly.
Selecting a Playback Mode
1.
Press the
/
BAND
button (20) on the remote control to
stop disc play.
2.
Press the
button (19) on the remote control or the
button on the joystick (9) to enter playback mode (PLAY
MOD).
3.
Press the
,
, or
buttons (18, 17, 19) on the
remote control, or the or button (8, 9) on the
joystick to choose from the following playback options:
4.
Press the
button (14) on the remote control to
confirm the playback mode then press the
button (18)
to begin playback.
Table 17: MP3/WMA Playback Modes
Play Mode
Playback Details
Disc Normal
Playback all files on the disc
and stop at the end.
Disc Repeat
Repeat playback of all files on
the disc.
Random
Randomly play all files and stop
at the end.
Single Track
Play a specific file and stop.
Repeat Track
Repeat playback of a specific
file.
Folder Normal
Play all files in a folder and stop
at the end.
Folder Repeat
Repeat playback of all files in a
folder/directory.
Summary of Contents for Mobile Multimedia DVD/MP3/WMA Receiver VM9020TS
Page 1: ...VM9020TS Operation Manual...