MP5720USB Quick Start Guide
Need help?
For technical assistance, call
the Jensen customer
support line at 1-800-323-4815.
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring
instructions carefully, or have the installation handled by an experienced technician.
10A
AUXILIARY
INPUT
®
XM DIRECT
CONNECT
CABLE
ACCESSORY
Connect the red wire to the factory
Accessory or Ignition wire, which
receives power when the key is
turned on.
POWER ANTENNA/
REMOTE AMP TURN ON LEAD
Positive (+) 12VDC output when the head
unit is turned on. Connect the blue wire to
a motorized antenna or to an amplifier.
CHASSIS GROUND
Connect the black wire to the factory ground wire.
If a factory ground wire is not provided, locate a
clean, unpainted metal part of the dash and secure
the ground wire with a "ring" terminal and a sheet
metal screw.
)
-
(
)
( +
BATTERY
Connect the yellow wire to the battery
or 12 volt power source that is always
live.
This wire MUST be connected
for the radio to work.
SPEAKERS
Left Front
Right Front
Left Rear
Right Rear
RCA OUTPUT
Connect to an
optional amplifier.
AMP
ANTENNA JACK
Connect to the factory or aftermarket
antenna lead. (Optional extensions or
adapters may be necessary depending
on the type of vehicle you have)
®
XM AUDIO
INPUT
TERK XMD1000
(sold separately)
®
XM ANTENNA
(sold separately)
iAUX
iAUX
3.5mm
iAUX-IN
2
