background image

Overhead Dome Lights

The Dome Lights integrated into the MVB85A are controlled by a three position slide switch. Sliding the switch to the ON position will turn
the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the
lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the installation Guide for wire connections. Do not leave the vehicle 
unattended with the dome light switch in the ON position, as this could result in a discharged battery. 

Remote Sensor

The MVB85A incorporates an infrared sensor which relays signals from the remote control to allow the unit to be controlled simply by pointing
its remote control at  the remote sensor eye.

ACCESSORIES

Wireless  Headphones (Optional)

The MVB85A  includes a built in infrared transmitter for use with wireless headphones (PN MMIRHS). Turning the Wireless Headphone switch
ON will activate the internal IR receiver and the volume can then be adjusted separately with the controls on each headset. Any number
of wireless headphones can be used, but all must be within direct line of sight from the transmitter. See the documentation accompanying
your wireless headphones for more detailed information.

Wireless FM Modulator

The MVB85A is equipped with buit-in wireless FM Modulator*, that allows you to listen to the MVB85A audio signal by tuning your vehicle’s
radio  to  the  selected  frequency,  (88.3,  88.7,  89.1,  89.5,  89.9MHz). This  feature  is  accessed  by  using  the  FM  transmitter  buttons  on  the
remote (ON/OFF, Channel Select). Whenever the FM modulator is on, broadcast reception on the vehicles radio may be poor. Switching
off the FM modulator will allow normal radio reception.

*Note:

 In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal

from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not 
a  defect  in  the  product,  but  the  result  of  a  stronger  local  radio  station  overpowering  the  wireless  FM  transmitter  in  your  overhead  pod.

If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. 
Please contact the installer if this is the case with your product.

17

Summary of Contents for MVB85A - 8.5" LCD Overhead Monitor


























Reviews: