background image

E-11

TROUBLESHOOTING GUIDE

SPECIFICATIONS 

Power Adaptor: 

AC input      120V~ 60Hz  10W

 

DC Output       5V        1.2A

Battery Back-up: 

2 x DC 1.5V UM-4 type batteries (not included) 

Bluetooth: 

Bluetooth Specification version 2.1

 

Support profile A2DP / HFP

Frequency Range: 

FM 87.5 – 108 MHz

Audio Power output: 

2W (RMS) x2 

Dimensions: 

6.6 cm (H) x 23.2 cm (W) x 17.0 cm (D)

The unit does not 
respond (no power)

The unit is disconnected 
from the AC outlet.

Reconnect to the AC 
outlet.

Unit is ON but there is 
low or no volume

The volume control has 
been turned all the way 
down.

Turn the volume control 
to a higher output.

No sound when 
playing audio via 
Bluetooth.

Your Bluetooth device 
has not been paired 
properly.

Pairing your Bluetooth 
device again according 
to the “BLUETOOTH 
OPERATION” section.

Noise or sound 
distorted on FM 
broadcast

Station not turned 
properly for FM.

Retune the FM 
broadcast station.

The volume control of 
your Bluetooth device is 
set at too low.

Increase the volume of 
your Bluetooth device.

The volume control of 
main unit is set at too 
low.

Increase the volume of 
main unit to adjust 
to”+” level.

The AC outlet has not 
power.

Try the unit on 
another outlet.

PROBLEM

POSSIBLE CAUSE

REMEDY

Summary of Contents for SMPS-628















Reviews: