7
2.4 Music Setting Mode
In the music playing mode, tap the MODE button to enter music setting mode.
2.4.1 Repeat Setting
Press
the
/ buttons to choose Repeat and then press the MODE button again to
enter. Press
/ to select the repeat mode you prefer and press the MODE button again
to confirm. The following repeat modes are available: Normal, Repeat One, Folder, Repeat
Folder, Repeat All, Random and Intro.
!
Normal: All songs tracks will play one after the other until all the songs on the list finish
playing;
!
Repeat One: Select one song track to play repeatedly;
!
Folder: Plays all song tracks inside a selected folder once;
!
Repeat Folder: Plays all song tracks inside a selected folder repeatedly;
!
Repeat All: Play all song tracks repeatedly;
!
Random: Play all song tracks in random order;
!
Intro: Play every song track for 10 seconds sequentially before skipping to the next.
2.4.2 Equalizer (EQ) setting
After choosing the Equalizer submenu, press the
/ buttons to
choose the EQ mode. There are 7 EQ modes available: Normal, Rock,
Pop, Classical, Soft, Jazz and DBB. Press the MODE button to confirm.
2.4.3 Tempo rate setting:
After choosing the Tempo rate submenu, press the
/ buttons to set the rate of
playback. There are 17 levels from -8 to +8 in which -8 is the lowest, +8 is the highest and 0
means original speed. Press the MODE button to confirm.
2.4.4 Replay (A to B) setting
Choose the “Replay” submenu, and “A” starts to blink on the
screen. Press the
button to select the start point “A”, then “B” will
start to flash for end point selection. Press the
button to set the
replay end point B. “A-B” stops flashing and now it automatically
starts to replay the passage between markers A and B.
If you want to change the marker points for a new replay
passage, just press
, then “A” starts to flash and then repeat the above steps to complete.
If you want to cancel the replay mode, press the MODE button once and the “A-B” icon
will disappear.
