Jensen VM9022HDN - Touch Screen Double Din MultiMedia..., Installation And Operation Manual

14

VM9022HDN

OPERATING INSTRUCTIONS

Power On / Off

Press the 

/SRC

 button (6) (or any other button on the front 

of the unit except reset), or the 

/POWER 

button (4) on the 

remote control, to turn the unit on. The buttons on the front of 

the unit light up and the current mode status appears on the 

TFT screen (17). 

Press and hold

 the   button to power off the unit.The monitor 

is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The 

Beep tone can be disabled through the Setup menu. 

Volume Adjustment

To increase or decrease the volume level, turn the rotary 

encoder (5) on the front panel or press the 

VOL+/ VOL- 

buttons (15, 16) on the remote control. When the volume 

level reaches “0” or “40”, a beep sounds, indicating that the 

adjustment limit has been reached. The volume ranges from 

“0” to “40”. The TFT screen displays the volume level for 3 

seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting 

regardless of the volume setting prior to turning the unit off. 

To program a specific turn-on volume level, turn the 

AUDIO

control (2) to adjust the volume to the desired turn-on volume. 

Push and hold

 the 

AUDIO

 button while the yellow speaker 

icon and level indication is displayed on the screen. The unit 

will beep two times to confirm your turn-on volume setting. 

Mute

Press the

 MUTE

 button on the front panel (8) or remote 

control (3) to mute the volume from the unit. Press the 

MUTE

button again to restore the volume. “MUTE” is displayed on 

the screen. Adjusting the volume or using any of the audio 

setup features cancels the mute function.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a 

telephone call is received by a cell phone.

Steering Wheel Control (SWC)

The VM9022HDN is compatible with the PAC (Pacific 

Accessory Corporation) steering wheel control adapter SWI-

PS. A 3.5mm female connector (labeled “SWC Interface”) on 

the back of the head unit allows connectivity to the PAC 

adapter. Please refer to the instructions included with the 

PAC adapter for detailed installation information.  

SWC Functions

The following controls are available for most vehicles:
1.

Vol Up

2.

Vol Down

3.

Mute

4.

Seek Up / Next Track / ** Preset Up

5.

Seek Down / Previous Track / ** Preset Down

6.

SRC (Source)

7.

** Select

8.

** Select

9.

Band

** If additional steering wheel control buttons are available on 

the vehicle, function 7 / 8 may be assigned the "Select" 

feature. This feature / function may not be available on some 

vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is 

pressed momentarily, Preset Up will be selected. If "Select" 

(function 7 or 8) is held down and function 5 is pressed 

momentarily, Preset Down will be selected. 

Playing Source Selection

Press the

 SRC

 button on the front panel (6) or remote control 

(8) to change between available playing sources in the 

following order: RADIO, SAT, DISC, NAV, BT, iPod, SD, USB, 

AUX1,

AUX2 and CAMERA. The playing mode is displayed 

on the TFT screen.

Auxiliary Devices

External peripheral devices can be connected to this unit via 
RCA output (AUX IN 2) or the MediaLink

4

. 

Select “AUX1” to play an auxiliary device connected via the 

MediaLink RCA or 3.5mm inputs. For example, you can play 

music files from a portable music player, video from a video 

camera and even view photos stored on a digital camera.
Select “AUX2” mode to access and control auxiliary devices 

connected to the “AUX IN 2” inputs on the back of the radio.

Selecting a Source while Navigating

While navigating, other sources may be selected and listened 

to such as AM-FM Tuner, CD, etc. To select a source, press 
the /

SRC

 button (6) and then select a source from the Front 

Source Menu. Navigation voice prompts will be heard 

automatically, although the navigation map cannot be seen. 

(The selected source audio will be muted until the navigation 

voice prompt command is completed, after which the source 

audio will resume.)

Source Menu

To access the SOURCE MENU, touch the TFT screen in the 

top left corner of the screen. 

VIDEO

LEFT

RIGHT

3.5mm - Audio

MediaLink

iPod Connector

(GEN 5 Recommended)

USB Connector (Type A)

RCA Inputs (AUX 1)

3.5mm Left & Right

Stereo Inputs (AUX 1)

AUX1

No Video Signal

01:53 PM

E

Q

Stereo

PLII Music

R

E

A

R

P

I

P

DISC

SOURCE MENU

DISC

RADIO

SD

iPod

SAT

USB

AUX 1

AUX 2

F

R

O

N

T
R

E

A

R

NAV

CAMERA

OFF

BT