56
VM9424BT
Error Messages
Care and Maintenance
1.
Use only a clean silicone cloth and neutral detergent to clean the front
panel or monitor. A rough cloth and non-neutral detergent (such as alco-
hol) may result in scratching or discoloration.
2.
Do not get water or cleaning fluids on the unit.
3.
If the temperature inside the player gets too hot, a protective circuit
automatically stops play of the disc. If this occurs, allow the unit to cool
before operating the player again.
4.
Never insert anything other than a 5” (12 cm) compact disc into the player
as the mechanism can be damaged by foreign objects.
5.
Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or
without an adaptor, as damage to the player and/or disc may occur. Such
damage is not covered by the Warranty on this product.
6.
The CD player may not operate properly in extreme hot or cold. If such
conditions occur, allow the interior of the vehicle to reach a normal
temperature before using player.
7.
When the vehicle warms up during cold weather or under damp
conditions, condensation may appear on the LCD panel. Should this
occur, the screen will not operate properly until the moisture has
evaporated.
Table 10: Error Messages
Message
Displayed
Cause
Corrective Action
Loading
Disc is being read
No Disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side up
Disc not present in loading
compartment
Insert disc
Bad Disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side up
Unknown
disc
Disc format is not compatible
with this unit
Region Error
DVD is not compatible with
region code of unit
Error
Illegal mechanism operation
Press EJECT key for 5 seconds to
reset loading mechanism
