Jensen VM9725BT Operating Instructions Manual Download

Page: 134 / 235

VM9725BT

Entering an Address (United States)

To enter an address as the destination, do as follows:

1. If you are on the Map screen, tap

to return to the

Navigation menu.

2. In the Navigation menu, tap the following buttons:

3. By default, iGO primo proposes the country and state where you are. If

needed,

tap

, enter the first few letters of the destination country or

state on the keyboard, and select one from the list. If you select a country
without a state, you can search for a city/town in all its states.

4. Select a new city/town:

a. Tap

. The city/town of your current location is offered by

default. For a local search, tap

to accept it, otherwise continue with

entering the destination city/town name.
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:

• The most likely city/town name is always shown in the input field.

To accept it, tap

Summary of Contents for VM9725BT












































































































































































































































Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands

Jensen VM9725BT, Operating Instructions Manual

Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands