Jensen VM9725BT Operating Instructions Manual Download

Page: 214 / 235

122

VM9725BT

You can control the volume of the following sound types:

Button

Description

This is the main volume control. These controls affect
all below sounds. They can also be accessed from the
Quick menu.

These controls affect the volume of the guidance
sounds (verbal instructions).

These controls affect the volume of the alert sounds
(beeps).

These controls affect the volume of the background
music.

Key sounds provide audible confirmation of tapping
the touch screen. These controls affect key sounds.

Controls for each sound type:

Button

Description

Volume Slider

Adjusts the volume of the related
sound.

Use the switch to mute the related
sound. The slider becomes inactive.
Tap again to re-enable.

Summary of Contents for VM9725BT












































































































































































































































Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands

Jensen VM9725BT, Operating Instructions Manual

Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands