Jensen VM9725BT Operating Instructions Manual Download | Manualshive

Page: 34 / 235

background image

34

VM9725BT

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored
stations (P1-P6) for the current band appear on the screen.

Storing a Station

1. Select a band (if needed), then select a station.
2. Touch the on-screen

Mem

icon to access the Preset Screen.

3. Touch the preset number in which you would like to store the current station

(or touch

X

to cancel and close the menu). The station frequency is displayed

at the top of the menu. The preset number will appear highlighted. The
station frequency will be stored in the highlighted preset. The station will be
displayed on the Tuner TFT Display Screen.

Recalling a Station

1. Select a band (if needed).
2. Touch an on-screen preset icon to select the corresponding stored station.

«
...
32
33
34
35
36
...
»

Summary of Contents for VM9725BT












































































































































































































































Reviews:

No comments

Related manuals for VM9725BT

Brand: Lexus Pages: 393

Brand: FAAFTECH Pages: 12

Brand: Power Acoustik Pages: 9

Brand: Mopar Pages: 42

Brand: Metra Electronics Pages: 8

Brand: Tristan Auron Pages: 21

Odyssey 2019 Series

Brand: Honda Pages: 10

Brand: Xomax Pages: 19

Brand: Asus Pages: 186

Brand: Kenwood Pages: 153

Brand: Polaris Pages: 24

Brand: Vordon Pages: 43

Brand: RADICAL Pages: 24

Brand: RADICAL Pages: 42

Brand: Tview Pages: 2

Brand: Pyle Pages: 35

Brand: Porsche Pages: 11

OpenSprinkler 2.3

Brand: OpenSprinkler Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands