Jensen VM9725BT Operating Instructions Manual Download

Page: 73 / 235

VM9725BT

Using Preset Stations

Ten numbered preset buttons store and recall channels for each band. All ten
stored channels for the current band appear on the screen.

Storing a Channel

1. Select a band (if needed), then select a channel.
2. On the SiriusXM® menu page 2, touch the

Mem

icon to access the Preset

Screen.

3. Touch the preset number (P1 through P10) in which you would like to store

the current channel (or touch the

icon to cancel and close the menu). The

channel will be stored in that preset and displayed on the SiriusXM® User
Interface tuner screen.

Recalling a Channel

1. Select a band (if needed).
2. Touch a channel on the preset channel list to select the corresponding stored

channel. Touch the or icon to scroll up or down the list.

Summary of Contents for VM9725BT












































































































































































































































Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands

Jensen VM9725BT, Operating Instructions Manual

Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands