Option B.
Connecting from a Stereo amplifier.
To add a Subwoofer to your existing Stereo
amplifier, Connect a Left and Right
Speaker Lead (not supplied) from
Speaker Terminals on your
amplifier to Left and Right
speaker lead inputs on
X-165 marked
“HI LEVEL IN”
“HI LEVEL OUT”
can be used if you wish to continue
full frequency signal from your Stereo amplifier, via Subwoofer to Front Left and Right speakers.
Where should I set Level & Frequency Control Knobs ??
Once you have your X-165 positioned and connected, we suggest experimenting with the Level
Control knob and Frequency Control knob to suit the Volume and depth of Bass desired. Initially,
for Hi-Fi listening, try setting the
Level Control at 11 o’clock
and the
Frequency
Control at 70Hz (10 o’clock).
This is the most popular setting. This setting will
boost Bass information 70Hz and below – which is deep, deep Bass at a strong (but not
overpowering) level. For Home Theatre listening (movies), increase the
Level Control to 1
o‘clock
and lower the
Frequency Control to 60 Hz (9 o’clock)
. This will enormously
enhance all Bass information 60Hz and below to a boosted Bass setting so when dinosaurs,
earthquakes and explosions kick-in,
they kick in !!
Refrain from turning Level Control beyond 1
o’clock as Bass will then overpower all other music. Also, overpowering may incur amplifier
damage, Cone damage or both.
For Big Bass Lovers:
With the purchase of a single RCA lead extra X-165’s can be
“daisy-chained” together and will operate as one. All rooms have acoustic sweet spots as well as
dead-spots. Adding an extra X-165 will remove the dead-spot as well as adding Bass resulting in
exponentially enhancing overall Sub-Bass performance. In this case 2 pcs X-165’s will perform
like 3. And 3 will perform like 5 etc. Switch them all to “AUTO” and they can be left on
indefinitely as they will all activate together when an incoming signal is sensed. Front panel LED’s
will all turn Blue and …
AWMEGAWD !!.
Add two, three or as many as you are game.
Red/Black speaker
terminals
From AMP
