background image

INTRODUCTION

Preparation

Required Tools

!

!

!

!

!

!

!

!

!

!

!

Disconnect battery cable from negative ( - ) battery

terminal.

Check all safety regulations in your vehicle's owner's

manual.

To ensure an obstacle-free fit, check and double

check mounting depth of the speakers against
available depth, as well as the location of window
mechanics, door handles, and window handles.

If using provided grilles, be sure mounting location is

sufficient distance from door and/or window handles.

The following is a list of tools needed for installation:

#2 Phillips screwdriver
Battery post wrench
Hand held drill w/assorted bits
Wire strippers
Wire crimpers
Wire cutters
3mm allen wrench

Since some of these Jensen Full Range Speakers are
most often used as direct replacements for stock
speakers, some of the following instructions will not
apply. For custom installations see your Authorized
Jensen Dealer.

WARNING: Check vehicle's owner's manual
before disconnecting the battery. Disconnecting
the battery in some vehicles may require an anti-
theft code when reconnecting. Some vehicles
may run rough after reconnecting the battery and
require that the on-board computer be reset at
the dealership. Check with your local dealer if
you are uncertain.

Welcome to Jensen!

This manual is designed to provide information for the
owner, salesperson and installer. For those of you who
want quick information on how to install this product,
please turn to the Installation Section of this manual.
Other information can be located by using the Table of
Contents. We at Jensen have worked very hard to
make sure all the information in this manual is current.
But, as we are constantly finding new ways to improve
our product, this information is subject to change without
notice.

Installation...................................................Page 3

Specifications..............................................Page 7

Warranty .....................................................Page 8

If, after reading your manual, you still have questions
regarding this product, we recommend that you see your
Jensen dealer. If you need further assistance, you
can call us direct at 1-800-323-4815.

Be sure to have your model number and date of
purchase available when you call. Please read your
warranty clearly and retain your receipt for possible
future use.

2

Summary of Contents for XRS 525











Reviews: