background image

Box

Guidelines

XS Series

Jensen recommends that you have your
subwoofers professionally installed. If choosing
to do your own installation, please note the
following:

• Make sure all moving parts and factory

electrical wires are cleared.

• Leave slack in the wire to prevent pulling or

stretching.

• Tie down wires to prevent them from getting

caught or shorted.

• Do not mount subwoofers where they might be

subjected to moisture.

• Correct subwoofer polarity must be used. The

polarity positive side is marked by a (+) sign or
red dot. Subwoofers out-of-phase will have
little bass output.

• Speaker frames will be twisted by installation

on uneven surfaces. This occurs when the
surface is carpeted/padded and screws are 
over-tightened.

• If using more than one subwoofers, be sure that

the combined impedance values cannot damage
the amplifier.

• Speaker wire should be isolated from the

vehicle’s electrical system to avoid noise being
picked up by the amplifiers. We recommend
Road Gear or Sound Quest brands of wire.

• Speaker wire should be large enough to carry

the full power of the amplifier. 14 gauge or
larger sizes are adequate.

• Be sure to give your ears a break if you listen

loud. Listening loud for extended periods can
damage your hearing!

Notes

XS1010

Enclosure Data

• Multi-purpose polycone 10"

subwoofer. Designed for
sealed, ported and bandpass
enclosures

• 450 Watts Peak power

handling, 150 Watts RMS

• 40 oz. magnet
• Efficiency of 88dB SPL

(1W @ 1M), Fs=38.8Hz

• Useable frequency response

24Hz-1kHz

• Subwoofers universels de

10 po. à cônes en
polypropy-lène pour
enceintes closes, à évent et
passe-bandes

• Puissance de son maximale

en crête 450 Watts, 150
Watts RMS

• Aimant de 40 onces 
• Efficacité de 88dB SPL

(1W @1M), Fs=38.8Hz

• Réponse de fréquence

utilisable 24Hz-1kHz

• Subwoofers de uso múltiple

de 10” con conos de
polipropileno para cajas
selladas, de puerto y de paso
de banda

• Capacidad máxima de

manejo de potencia de 450
Vatios, 150 Vatios RMS

• Magneto de 40 oz. 
• Eficiencia de 88dB SPL

(1W a 1M), Fs=38.8Hz

• Respuesta de frecuencia

utilizable 24Hz-1kHz

XS1010:             Thiele Small Parameters
Nom. Dia.

8.23 in (209 mm)

( Fs )/( Fo ) Hz

38.8 Hz

( Vas )

0.92 ft

3

(26.0 ltr’s)

( Qts )=(Qms x Qes)/(Qms + Qes)

0.32

( Qms )

10.53

( Qes )

0.33

( Xmax )

0.157 in (4 mm)

( Pe ) RMS ( Max.)

150W (450 Max.)

( Re ) DC (R)

3.49

( Sd )

41.7 in

2

(269cm

2

)

( Cms )

0.248 x 10

-3

M/N

( Mms )

2.38 oz (67.5g)

( Bl )

13.26 Tm

(SPL )

88dB, 1W/1M

VC dia.

2" (51 mm)

4.7"

(119.38mm)

4.4"

(111.76mm)

9.02"

(229.10mm)

10.08"

(256.03mm)

Reviews: