16
Frequent Adjustments
Safety Straps
To adjust the length of the safety strap, thread the strap through the buckle and tri-glide until desired length is
achieved. Ensure that the safety strap end is secured by the tri-glide at all times.
Always use the safety straps when the stander is in use. The safety strap should be secured on the outside of
the Hip and Thoracic straps and over the sidepads, as above.
Tri-glide
All belts and harnesses should be used at all times. For therapy purposes it may be necessary
to deviate from this rule and any deviation should be fully documented as part of a Risk
Assessment or Therapy Program and all relevant staff and carers appropriately trained. Secure
client with straps before adjusting product. Ensure finger’s width between safety strap and client
to prevent over tightening or client moving to inappropriate position. Adjust straps for each client
and changes of clothing. Minimum Velcro® overlap: 3 inches (7.5cm) on all straps. If strap is not
long enough: DO NOT USE PRODUCT.
