9
Monkey
jenx.com
This product must be thoroughly inspected by a qualified person at least annually
Daily Checks
Daily checks of the equipment should be carried out by carers. These checks are not technical but a basic un-
derstanding of the product is needed. Multiple daily checks may be needed in schools or therapy rooms where
the products are used by multiple users. The checks should include the following points:
•
Check that all nuts and bolts are in place and secured
•
Check that all mechanical movements operate fully
•
Check the structure of the product for signs of fatigue
•
Castors: Lift base and check each wheel to ensure it is not loose or worn. Remove any grease or dirt that
has built up on the wheels, check that the brake stops the wheels rotating (where applicable)
•
Check gas springs for normal operation and resistance. Slow descent (creeping) of the gas spring can be
checked by observing the position of the unit over a period of time
•
Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx
Limited to arrange replacement
If you have filled your product inspection log book, copies can be printed from www.jenx.com
We recommend that on a monthly basis a competent person who is familiar with this piece of equipment and
who has been trained in its use should carry out a more detailed check:
Monthly Checks
•
Replace any lost or worn washers or bolts
•
Check tray for damage. Ensure that the tray edging is secure and that the tray is clean and free of any
rough or sharp corners
•
Check all upholstery for any signs of wear and tear
•
Brush Velcro® to remove fluff
•
Check wooden parts for splitting or splintering
•
Check straps for fraying and missing or broken buckles
•
Clean any stains or spillages
•
Contact Jenx Limited if any accessories not manufactured by Jenx Limited have been attached to the
product. Unauthorised accessories may affect the safety of this product and invalidate your warranty
•
Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx
Limited to arrange replacement
Maintenance
