TMPM5200-2
6-1
6.1 PROCESS
MODE
The WinSPM system has two modes, a scan mode and a process mode, which are
independent of each other. Here, a description is given of the method of operating the
process mode.
■
Starting the System in the Process Mode
1.
Turn ON the POWER switch on the control unit, then turn ON the switch of
the computer.
Confirm that power is supplied to both the computer and the display.
There is no need to carry out this operation if power is already being supplied
to the computer and Windows has started.
2.
When Windows starts, double-click the Analysis icon on the desktop.
The WinSPM software starts in the process mode, and in the same way as when the
scan mode starts, the system asks you for your user name and password.
This window will appear even if the software has already started in the scan
mode.
3.
Enter the user name and password, then click OK with the mouse.
The WinSPM software starts in the process mode.
■
Controlling User Name
Refer to Sect. 5.1.3 “ Controlling User Name”.
