6.10.4 3D Display
This function displays an SPM image in three dimensions. The 3-dimensional image
appears in a separate window (3D Window) from the Display Window.
■
Quality of 3-dimensional display
The 3-dimensional image is normally a simplified display. When you click the Plot all
Points button, the precision display computation starts, enabling a more accurate
3-dimensional image to be displayed.
The time taken from when you click Plot all Points until a high accuracy 3-dimensional
image is displayed differs depending upon the performance of the computer used.
Generally, however between 10 and 20 seconds are necessary.
Set each parameter of the 3-dimensional image described below using the simplified
display condition, then after determining the parameters carry out accurate display
computation.
■
Set parameters for 3-dimensional display
Position tab (position adjustment)
•
Rotate
Specify the rotational angle in each of the X, Y and Z directions. (360
°
)
Rotate Y
Rotate X
Rotate Z
•
Zoom
Adjust the magnification (Zoom) in the height direction.
6-82
TMPM5200-2
