７
APPENDIX
7.2 SETTING UP The WinSPM PROGRAM
7.2.1 Selecting the instrument
The WinSPM program controls the JSPM-5200 by default and has to be reset when an
instrument other than the JSPM-5200 is used. The administrator resets WinSPM. Also,
when the WinSPM program controls optional attachments, all necessary information on
the attachments should be given to the program. This can be accomplished using the
Device Setup window.
1.
Start the WinSPM program with system administrator privileges (log in using
the user name Admin). The WinSPM for Scanning Probe Microscope window
opens.
2.
Click on SPM Scan on the menu bar to open the pull-down menu and click
on Device Setup to open the Device Setup window.
3.
Make sure that the radio button corresponding to the instrument being used,
for example, JSPM-5200, is selected.
The contents of the Option Device section vary depending on the instrument
selected.
TMPM5200-2
7-9
