background image

27

Operations Manual

7. Visual and Audible Alarms

There are three types of alarm indicators: two visual (Hazard Status Bar and

Traffic Lights) and one audible (100dB alarm).

7.1

HAZARD STATUS BAR

In normal operation, with no hazard detected, a display similar to the one below

(see Fig. 7.1) is shown:

Fig. 7.1 - The display screen with no hazard detected

The FishSAFE unit constantly monitors the “Keyhole” and as soon as one or more

hazards is detected inside the “Keyhole” a coloured Hazard Status Bar is displayed

along the top of the screen as shown below (see Fig. 7.1a):

Fig. 7.1a - The display screen with the Hazard Status Bar

Whenever the Hazard Status Bar is displayed, there will always be one or more Traffic

Lights also displayed. The exact operation of these “Traffic Lights” is detailed in Par. 7.3.

7.2

HAZARD STATUS BAR CYCLING

The Hazard Status Bar can only show one hazard at a time and if more than one

hazard is detected, then it cycles around each hazard in turn displaying the

information on the hazard for 3 seconds before cycling to the next.

As well as the Hazard Status Bar changing, a special “square target” cursor

highlights the hazard on the screen.

Summary of Contents for fishsafe








































Reviews: