MAGPRO TP2000
Page 3 of 10
2
User Instructions
Notes for the customer
The instruction manual includes important instructions as to how
to operate the plant safely, correctly and economically. Observ-
ing these instructions helps to avoid risks, repair costs and
downtimes and to increase the reliability and lifetime of the
machine.
The instruction manual must be read and used by each person
who works with the electrical equipment. This applies in particu-
lar to the "Safety Instructions" chapter. It is too late to read the
manual and safety instructions when work is actually being
carried out at the machine.
Always keep one copy of this manual next to the machine so
that it is at hand ready to be consulted!
In case of any doubt or questions, always contact the machine
manufacturer.
In addition to the instruction manual, the accident prevention
regulations which apply in the country of use and the user loca-
tion must be adhered to. In addition, the recognised technical
rules regarding accident prevention must be observed.
Liability and warranty
All the information contained in this instruction manual has been
drawn up to the best of our knowledge and belief, taking our
experience to date into consideration.
The original version of this instruction manual was drawn up in
the German language and was checked by us for accuracy of
content. The translation into the respective national/contractual
language was carried out by a recognised translation agency.
This instruction manual has been put together with the greatest
of care. However, if you should discover any incomplete items or
mistakes, please inform us in writing. Your suggestions for
improvement will help us to create a user-friendly manual.
Subsequent Orders and Copyright
Further copies of this instruction manual can be ordered from
the address below. We ask for your understanding that further
copies are subject to charge.
Jepson Elektrowerkzeuge
Ernst-Abbe-Straße 5
D-52249 Eschweiler
Phone:
+49 (0)2403 – 6455-0
Fax:
+49 (0)2403 – 6455-15
Mail:
info@jepson.de
All rights are expressly reserved. Duplication or transfer on to
third parties in any form whatsoever is not allowed without our
prior written permission.
Abbreviations
V
Volt
Hz
Hertz
W
Watt
~
AC
/min
Revolutions per minute rpm
N
Newton
3
Safety Instructions
The basic prerequisite for safe handling and disturbance-free
operation of this electric tool is knowledge of the basic safety
instructions. In addition, the accident prevention rules and regu-
lations which apply in the user location must be adhered to, as
well as the recognised rules of the trade with regard to safety
and correct working methods.
It is not permitted to use the electric tool for other purposes than
those intended by the manufacturer. Such use could give rise to
unforeseeable risks.
Local working and safety rules and laws must always be fol-
lowed. The same applies to regulations which apply to the envi-
ronment.
Safety equipment must never by removed or bridged over.
When using oils, greases and other chemical substances, the
safety regulations which apply to the particular product must
always be observed! Contact with chemicals should be avoided
as far as possible. Before it is permissible to work with these
substances the instructions for use on the packaging must be
read and followed. This applies for all chemicals, therefore also
for cleaning media.
All notes and signs regarding safety and possible risks must be
kept in a fully legible condition.
3.1
Illustration of Safety Instructions
The following symbols are used in the instruction manual:
Warning against possible danger of injury or
danger to life for persons
Warning
Warning against possible damage to property or
the environment
Caution
Warning against dangerous electrical voltage
Warning against hot surfaces
Ignoring these instructions can lead to serious damage to
health, up to life-threatening injuries!
This symbol indicates important information
Hazardous to the environment
3.2
General Safety Instructions
This electric tool fulfils the basic EC safety
and health regulations. Nevertheless, dan-
gerous situations can arise.
Warning
All safety equipment must be maintained in
perfect condition.
Warning
