Check the electrostatic system
indicator when the equipment is
running.
Every operation. Check if the
spray gun power wire is
connected and the wire is
damaged.
Clean the nozzle according
“nozzle cleaning” procedures.
Every 50 hours of work.
No
1
2
MAINTENANCES
CYCLE
List of Maintenances
NOTE
The nozzle may be blocked after long time use, which will reduce the spray flow.
Cleaning the inside of the nozzle regularly will avoid blockage caused by deposited
chemicals.
08/09
NOTE
Please pay attention to the following maintenance. Improper operation will affect
equipment performance and will not be covered by warranty.
CAUTION
The nozzle cap should be tightened by hand, never with pliers or other tools.
Shield
Nozzle cap
WARNING
Stop for 5-10 minutes after the device continuously works for more than 1 hour to
avoid compressor damage and extend device service life.
The battery should be used at a suitable temperature, with a charging temperature
range of 0-45
℃
and a discharge temperature range of -20
~
60
℃
.
WARNING
It is forbidden to wash the compressor directly with water.
WARNING