background image

 

 Do not stop charging until charge process is finished. Repeat using the battery which is 

not fully charged will shorten the battery life, so the battery should be fully charged as much as 
possible. When battery is fully charged, the power indicator will turn to green. Do not stop 
charging before fully charged. 

 

After finish charging, turn off the power supply, otherwise the battery will discharge slowly. Do 
not charge more than 24 hours. Over-charging is dangerous. 
 

 

 
 

Users should follow the following rules to avoid charging dangers: 

The electric wheelchair doesn’t include the charger, please use national standard charger that 
the output voltage is 24V/DC 2A/4A. 

 

It should be well ventilated when charging. Do not expose the wheelchair to sunlight and humid 
environment. 
The charging environment temperature range is from 10

 to 50

. If it is out of the environment 

temperature range, the battery is unable to function well, and can easily make battery damaged. 

 

It’s normal for the fan making a sound during charging. It is for cooling the charger, please do 
not worry about it. 

 

Prevent liquid go into the charger during charging. And do not place charger on the flammable 
items, such as: fuel, footrest or seat cushion. 

 

 
 
4.3 The Usage and Maintenance of Battery 

 

Wrong operation of replacing battery may cause danger of explosion. Only the same or 
recommended type of battery is suitable for replacement. And please make sure the battery 
poles are correct. Key points for prolong the battery life: charge frequently, to keep battery 
power full. It’s better to fully charge the battery if the wheelchair is not being used. If stop using 
for a long time, it’s better to charge twice per month. 
 
 

 

 Please stay away from the flames when charging the battery. The flames may cause 

battery fire or explosion. 
Charging makes hydrogen, do not smoke while charging. 
Do not unplug the power supply when the socket or your hands are wet, it may cause electric 
shock. In case of unpredictable accident will happen and hurt the user, do not use or sit on the 
electric wheelchair when charging. 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for JRWD303














Reviews: