B. Introduction to 2.4GHz Digital Wireless A/V Sender
Congratulations on purchasing this
2.4GHz Digital Wireless A/V
Sender. This sender system is a digital wireless audio/video sender
that uses 2.4GHz Frequency Hopping technology and GFSK
modulation, and
random ID codes to protect personal privacy.
There are over billion hopping sequences to minimize interference
and deliver consistently an excellent video and audio quality up to
100 meters away.
This sender system also integrates an IR remote control extender to
allow you to control the audio or video source from another room
using your existing remote controller.
Using
this
2.4GHz Digital Wireless A/V Sender, you can enjoy
greater convenience and security in many ways:
General Application
x
Watch the movie you rent on any TV in house without moving
your DVD, laser disc player or running messy cables.
x
Watch cable or satellite programs on any TV in house.
x
Listen to stereo-quality music from your receiver on any powered
speakers inside or outside the house.
Safety & Security Application:
x
Connect a camera as a wireless security system.
x
Monitor your sleeping baby, playing children, the elderly, or the
disabled on TV using your existing camcorder.
x
See who is outside the door on TV through your camera or
miniature CCD camera.
x
Monitors and records the meeting from another room.
x
And many more uses!
3
Ƶ
ġ
The Using Attention
The outlet of the power supply must have the same voltage as the
local area.
1. Be sure the transmitter and the receiver were connected to the
equipment correctly (e.g. Connect the transmitter to the DVD or
VCR, and the receiver to the TV).
2. When DC plug is pulled out from transmitter or receiver, it needs
to wait for a few seconds in order to insert it again.
3.
When switch is off from transmitter or receiver, it needs to wait for a few
seconds in order to restart again.
4. Before you use, you must follow the instructions to complete the
pairing code action.
5.
Adjust antenna for least interference. (vertical or horizontal)
6. I
n most situations, one set of equipment has a better feature within 100
meter. When two equipment or more is used at the same time, It can
automatic jump to different channels. But the distance between
transmitter and transmitter (receiver and receiver), preferably greater than
1 meter above.
7. To be ensure the best remote control, please do not place the receiver
under strong light.
8. Adjust antenna for least interference. (vertical or horizontal)
9. If there are some reasons cause the devise stop, you can try to turn power
switch off then on again and make the devise re-link.
10. The remote control should face to the IR window of he receiver (there
is an IR marker), and the transmitter IR extender should face to the IR
window of the source A/V equipment. The IR remote control has to be
within the standard distance.
11. To be ensure the best remote control, please do not place the receiver
under strong light.
4
When the devise working, it will produce heat, so do not cover the
