Jesmay Electronics JM2318T, Owner'S Manual

A/V link system is suggested to connect to following A/V equipment use: 

                 Video sources

˖

                       Audio sources

˖

VCR                                  

Compact Disk player or Changer                                                  

Cable set-top box (with A/V output)

Stereo Receiver 

Satellite Receiver

Cassette Deck 

Laser Disc Player 

Camcorder or Miniature CCD Camera  

Digital decoder

DVD

7

ˍġ

How to pair the transmitter and receiver 

Before shipment of this product has been matching ID code, you can 

instantly use. If you want to re-pair your code, you have to comply 

with the following instructions to the matching code. 

Please see the follow pairing operation. 

1. The first, push the power switch of transmitter and receiver and 

turn on both power switch. Then you can press the PAIR button 

on the front of the transmitter and not release until the LINK LED 

on the front of the transmitter begins to flash then you can release 

the PAIR button, and then the transmitter starts to

enter the 

pairing state and automatically link ID code to the receiver.  

2. During the LINK LED of transmitter is in flash state (around 35 

seconds.), you need to press the PAIR button on the front of the 

receiver and not release until the LINK LED begin to flash then 

you can release the PAIR button, and then the receiver starts to

enter the pairing state and automatically link ID code to the 

transmitter. 

3. Please don’t turn off their power switch during the receiver and 

transmitter is linking ID code with each other. When transmitter 

and receiver complete the matching code, their LINK LED will 

be lit directly. That means they have completed the pairing of 

work.

                                                        8 

Ƶ

ġ

How To Transmit Audio/Video from Your VCR or DVD 

Connect VCR and transmitter with a 3RCA plug to 3RCA plug AV cable, just 
plug RCA plugs to RCA sockets of VCR and plug to A/V in port of transmitter. 

Note:

When you use a set the transmitter and receiver 

which has a pairing ID code, If you turn on the transmitter 
or receiver, you will find  the link LED will light

for 3 

seconds, then off, and it will automatically start to pair to 
receiver or transmitter.

If it finds matching objects, the 

link LED will be lighting, and if the time, the transmitter 
was connected with DVD or SAT., or VCR and the receiver 
was connected with TV, and then you will be able to watch 
the program of DVD or SAT., or VCR on your TV. If it 
can not find the matching object, it will always send 
matching code until it finds a matching objec

t.