4
43211B
Optional: Vehicle Lockout Wiring for 1995-2014 DS Golf Cars
8. Start by
locating “Wire
a
ssemblies A & B”
. Using these 2 wire assemblies A & B make the following connections as
shown in the picture below.
9. Now that you have wire assemblies A & B connected make the following connections indicated in the wire diagram
above called BY-PASSED OBC.
10. Re-install previously removed hardware from step 6 (page 2) on battery Negative ("-") post. Refer to your particular
battery manufacture for torque specifications on battery hardware.
11. Switch the Run/Tow switch to the RUN position.
12. Re-install seat.
Installation complete.
