6
JAT-103 Impact Wrench
Tool specifications
Model number
JAT-103
Stock number
505103
Square drive
1/2 in.
Bolt capacity
9/16 in.
Anvil retainer type
Hog ring
Impact mechanism
Twin hammer
Maximum torque
680 lbf•ft (921.96 N•m)
Working torque
25-400 lbf•ft (33.9-542.3 N•m)
Free speed
8,000 RPM
Blows per minute
1200
Average air consumption
4.2 CFM
Air inlet
1/4 in. NPT
Air hose inside diameter
3/8 in.
Required air pressure
90 psi (621 kPa)
Vibration value
2.8 m/s
2
Noise level
1
100
dB(A)
Power setting
5 air regulator settings, forward and reverse
Grip Pistol
style
Overall Length
7-1/4 in. (184.15 mm)
Housing material
Aluminum
Net weight
5.91 lb. (2.68 kg)
Shipping weight
6.39 lb. (2.90 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
