Jet 708928Z, Owner'S Manual

6 

Unpacking 

Open shipping cartons and check that all parts are 
intact.  Report  any  damage  immediately  to  your 
distributor. Read the instruction manual thoroughly 
for  assembly,  alignment,  and  maintenance 
instructions. 

Contents of the Shipping Containers 

Box One: 

1 XACTA Fence II 
1 Lock Lever Knob 

Box Two: 

1 Front Rail 
1 Back Rail 
1 Guide Tube 
3 Black Plastic End Caps 
1 Hardware Bag containing: 

000

14 ea   1/4-20 x 1-1/2 Hex Cap Screws  

0000

7 ea   1/4-20 x 3/4 Hex Cap Screws  

000

35 ea   1/4 Flat Washers  

000

21 ea   1/4 Lock Washers 

000

14 ea   1/4 Hex Nuts 

Notes:

    The  hardware  should  be  packed  in  the 

guide rail along with the end caps. 
The contents of the hardware bag (shown at right) 
are drawn full scale. 

Note 1:

 Quantities for items in the hardware bag 

are for the 52" rail system. If you purchased the 
30" rail system, there will be extra hardware. 

Note 2:

 If the optional wooden extension table is 

not used, there will be extra hardware. 

Tools Required for Assembly & 

Adjustment 

1  #3 Cross Point Screwdriver 
2  10mm Open End Wrenches 
1  Combination Square & Straight Edge 
1  Electric Drill  
1  1/4”, 3/16, 5/16”

Drill Bits 

2  4”-6” C-Clamps 
1  5mm, 6mm Hex Wrenches 
 

Contents of Hardware Bag