background image

 

5

 

blahblahblah 

20.  Make your workshop child proof with padlocks, master switches or by removing starter keys. 

21. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are 

careless acts that can result in serious injury. 

22. Do not use the dust collector for anything except wood dust. Materials such as liquids, metal shavings, 

metal dust, screws, glass, plastic or rock can cause sparks and/or damage when coming into contact with 
any part of the dust collector. 

23.  Use recommended accessories; improper accessories may be hazardous. 

24.  Maintain tools with care. Follow instructions for lubricating and changing accessories. 

25. Turn off the machine before cleaning. Use a brush or compressed air to remove chips or debris — do not 

use your hands. 

26.  Do not stand on the machine. Serious injury could occur if the machine tips over. 

27. Never leave the machine running unattended. Turn the power off and do not leave the machine until it 

comes to a complete stop. 

28.  Remove loose items and unnecessary work pieces from the area before starting the machine. 

 

 

 

Familiarize yourself with the following safety notices used in this manual: 

 

 This means that if precautions are not heeded, it may result in minor injury and/or possible 

machine damage. 
 

 This means that if precautions are not heeded, it may result in serious injury or possibly even 

death. 
 
 
 
 
 
 

- - SAVE THESE INSTRUCTIONS - - 

 

 

 
 

Summary of Contents for DC-1100A





















Reviews: