Do not operate the machine under the
influence of drugs, alcohol or any
medication. Be aware that medication
can change your behaviour.
Keep children and visitors a safe
distance from the work area.
Never leave a running machine
unattended. Before you leave the
workplace switch off the unit.
Do not operate the electric tool near
inflammable liquids or gases.
Observe the fire fighting and fire alert
options, for example the fire
extinguisher operation and place.
Do not use the dust collector in a dump
environment and do not expose it to
rain.
Do not use this equipment to filter
volatile fumes or smoke.
Wood dust is explosive and can also
represent a risk to health.
Dust form some tropical woods in
particular, and from hardwoods like
beach and oak, is classified as a
carcinogenic substance.
Connection and repair work on the
electrical installation may be carried
out by a qualified electrician only.
Have a damaged or worn power cord
replaced immediately.
3.3 Remaining hazards
When using the machine according to
regulations some remaining hazards
may still exist.
Dust can cause injuries.
The use of incorrect mains supply or a
damaged power cord can lead to
injuries caused by electricity.
Danger of explosion if not properly
grounded.
4. Machine specifications
4.1 Technical data
Dust inlet
Ø125mm (2xØ100mm)
Air flow Ø125
1200 m³/h
Vacuum pressure
1880Pa
Collector bag capacity
150L
Overall DC-1200:
(LxWxH)
1000x750x2000mm
Net weight
38 kg
Overall DC-1200CK-M/T:
(LxWxH)
1000x750x1900mm
Net weight
47 kg
Mains
230V ~1/N/PE 50Hz
Input power
1,5kW (2HP) S1
Reference current
7.3 A
Extension cord (H07RN-F)3x1,5mm²
Installation fuse protection
16A
Mains
~400V,3L/PE, 50Hz
Motor input power
1,5kW (2HP) S1
Reference current
2,8 A
Extension cord (H07RN-F) 4x1.5mm²
Installation fuse protection
10A
Isolation class
B
4.2 Noise emission
Acoustic pressure level (EN ISO 3744):
80 dB (A).
The specified values are emission
levels and are not necessarily to be
seen as safe operating levels.
As workplace conditions vary, this
information is intended to allow the user
to make a better estimation of the
hazards and risks involved only.
4.3 Content of delivery
Filter bag
Collection bag
Mobile casters (4x)
Dust inlet 2 x 100 mm
Hose clamps (2x
4”)
Hose ground wire
Operating manual
Spare parts list
4.4 Unit description
Fig 1
Fig1A
Fig 2
A….Connector Hose
B….Collector Body & Fan/Motor
Assembly
C….Collector
D….Base
E….Upper Bag Support
F…. Support
G….Inlet
H….Filter Bag
I…..Packing
J….Four Casters
K…. Hex. Bolt (M8x16 , 18pc;
M8x25, 4pc; M6x20, 6pc; )
Hex.Nuts (M8, 4pc; M6, 6pc);
Head Screws(M6x10, 16pc);
Washer (M8, 26pc ; M6, 28pc);
Hex. Wrench(5, 1pc)
L…. Motor Base
M…Handle
N
….Bag Clamp (2pc)
O
….Hose
P
…..Hose Clamp
Q
…..Collecter Bag
R
…..Switch
S
……Motor
T……Plug(400V) or Wire Plug(230V)
W
……Outlet
Y……..Cartridge Filter
5. Assembly and start up
5.1 Assembly
If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the unit!
Dispose of the packing in an
environmentally friendly manner.
Base:
Install four casters to the under side of
the base with bolts, lock washers
washers and nuts (Fig 3)