Jet DC-1200, Operating Instructions Manual

Fig 3

Motor assembly: 

With the motor base, collector body & 
fan/motor assembly in place, secure it 
to the base plate using the screw and 
washers provided as shown in Fig 4 
 

Fig 4

Packing  & Square Connecting 
assembly:

Install the packing and Mount  the 
outlet, connector to the collector body 
assembly using screw and washers 
provided. Fig 5 & Fig 6. 

Fig 5 

                          Fig 6 

Connector Housing: 

Attach 3 support brackets (A, Fig 7) to 
the base using 6 hex cap screws and 
washers. 

Fig 7 

Install the housing (A, Fig 8) with 6 hex 
cap screws. 

Fig 8 

Hose: 

Attach the hose (A, Fig 9) with 2 
provided clamps (B). 

Fig 9 

Install the filter bag(DC-1200): 

Attach the loop of the filter bag to the 
filter bag hanger (M). 

Place the filter bag (A) over the bag 
support housing. 

Place a bag clamp (B) over the bag 
and close the clamp. 

Fig 10 

Note: make sure the bag is fastened 
securely so that no dust will escape 
during operation. 

Canister filter (DC-1200CK): 

Mount the handle (I, Fig 10A) with 
screw (J), flat wasshers (H) . 

Fig 10A 

Install the collection bag: 

Place a collection bag (E) over the bag 
support housing. 

Place a bag clamp (B) over the 
collection bag and close the clamp.