JET
5
Tool specifications
Model
JAT-125 Impact Wrench
Stock number
505125
Square drive
3/8 in.
Bolt capacity
3/4 in. (M20)
Anvil retainer type
Ring
Impact mechanism
Jumbo hammer
Maximum torque
430 lbf•ft (583 N•m)
Working torque
90~370 lbf•ft
(122~501.65 N•m)
Free speed
8500 RPM
Blows per minute
1,500
Air consumption at 90psi
27.05 SCFM
Air consumption under load
19.32 SCFM
Air inlet
1/4 in. NPT
Air hose inside diameter
3/8 in.
Required air pressure
90 psi (621 kPa)
Vibration value
9.62 m/s
2
Sound power
1
113.6 dB(A)
Sound pressure
1
102.6 dB(A)
Grip
Pistol style
Overall Length
4.40 in. (111.76 mm)
Housing material
Composite
Net weight
2.5 lb. (1.13 kg)
Shipping weight
2.63 lb. (1.19 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
