background image

 6

Collection bags: 
 Bag 

material 

..................................................................................................................................... polyethylene 

  Drum collection bag size (Dia. x L) ........................................................................ 26 x 27-9/16 (660 x 700 mm) 
  Canister collection bag size (Dia. x L) ...................................................... 19-11/16 x 23-5/8 in. (500 x 600 mm) 
 
Main materials: 
 Frame 

................................................................................................................................................ steel  tubing 

 Body 

.................................................................................................................................................. 18 ga. steel 

 Paint 

finish 

....................................................................................................................................... powder coat 

 
Dimensions: 
  Footprint/base dimensions (L x W) ......................................................................... 47 x 22 in. (1195 x 559 mm) 
  Height from floor to inlet port center ................................................................................... 42-3/4 in. (1085 mm) 
  Overall dimensions, assembled (L x W x H) ................................ 22 x 47 x 67-9/16 in. (559 x 1195 x 1715mm) 
  Overall dimensions, shipping carton (L x W x H) ............ 42-5/16 x 23-1/4 x 30-5/16 in. (1075 x 590 x 770 mm) 
   
Weights:

  

 Net 

weight 

.................................................................................................................................. 143 lb. (64.8 kg) 

  Shipping weight, approximate .................................................................................................... 176 lb. (79.8 kg) 

 

The specifications in this manual were current at time of publication, but because of our policy of continuous 
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring 
obligations. 

 

 

 

Summary of Contents for JCDC-1.5





















Reviews: