16
6.0 Operations
6.1 Start/stop
Press green start button (A, Figure 15) to start dust collector. Press red stop button (B) to stop.
The stop button (B) remains engaged after being pushed. To restart dust collector, rotate stop button clockwise
to disengage.
Figure 15
6.2 Remote controller
The RF (radio frequency) remote controller operates on 2 AA batteries (included). The batteries will need
replacing periodically. The remote controller has an effective range up to approximately 50 feet (15 meters).
Press the + or – button to select desired timer setting: 2, 4, 6 or 8 hours. The dust collector will stop
automatically at end of selected period. For continuous operation (no timer) select infinity (
) position.
Figure 16
6.2.1 Remote controller reset
If the remote controller begins to function improperly, it should be cleared and reset.
To clear the remote controller, press and hold reset button (C, Figure 16) for 3 seconds until receiver “beeps” 3
times.
To reset the controller:
1. Press reset button (C, Figure 16) for 1 second until receiver “beeps” once.
2. Press and hold “ON” button on the remote controller until receiver “beeps” twice. (If you are using multiple
remotes, perform step 2 on each remote before proceeding.)
3. Press and hold reset button (C) for 3 seconds until receiver “beeps” 3 times.
The remote controller is now ready.
