JET
5
Tool specifications
Model number
JCT-1600
JCT-1601
JCT-1602
Stock
number
550600 550601 550602
Type
Bench Bench Bench
Impact rate (blows per minute)
1,500
1,000
800
Piston stroke
2 in.
2-9/16 in.
3-15/16 in.
Bore
18 mm
22 mm
25.4 mm
Taper
1.44 deg.
1.38 deg.
1.39 deg.
Butt
type
Rubber Rubber Rubber
Butt diameter
1-11/16 in.
2-3/64 in.
2-9/16 in.
Average air consumption
14 CFM
17 CFM
24 CFM
Air Inlet
1/4 in. NPT
3/8 in. NPT
3/8 in. NPT
Air hose minimum inside dia.
3/8 in.
3/8 in.
3/8 in.
Required air pressure
90 psi (6.2 bar)
90 psi (6.2 bar)
90 psi (6.2 bar)
Vibration value
35.04 m/s
2
33.84
m/s
2
32.49
m/s
2
Noise level
1
100.4
dB(A) 102.9
dB(A) 104.7
dB(A)
Overall length
11~14-1/4 in.
14-1/2~18-1/2 in.
19-11/16~26 in.
Housing
material
steel steel steel
Net weight
3.53 lb. (1.6 kg)
6.5 lb. (2.95 kg)
13.23 lb. (6 kg)
Shipping weight
4.5 lb. (2 kg)
7.5 lb. (3.4 kg)
15 lb. (6.8 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
