JET
3
25. Give your work undivided attention. Looking
around, carrying on a conversation and
“horse-play” are careless acts that can result
in serious injury.
26. Do not force a tool or attachment to do a job
for which it was not designed. The right tool
will do the job better and more safely.
27. Repetitive motions and/or exposure to
constant vibration can be harmful to hands
and arms. Take frequent breaks and relax
hands during extended operation. Change
posture to avoid discomfort or fatigue.
28. Compressed air can be harmful if directed
toward sensitive areas of the body, and may
propel small particles caught in the air stream.
Exercise proper caution.
29. Use
only
recommended
accessories;
improper accessories may be hazardous.
30. Maintain tools with care. Keep air tool clean
and oiled for best and safest performance.
31. Do not use combustible gases, carbon
dioxide, oxygen or any bottled gas as an air
source for the tool. These can present risk of
explosion and serious injury.
32. Do not lubricate the tool with combustible
liquids, such as kerosene, diesel or jet fuel.
33. Do not dispose of this tool with normal
household waste. Never dispose of the air tool
into fire.
Specific Warnings for Chipping
Hammers
34. This chipping hammer is designed and
intended for use by properly trained and
experienced personnel only. If you are not
familiar with the proper and safe operation of
a chipping hammer, do not use until proper
training and knowledge have been obtained.
35. Make sure chisel has appropriate shank with
oval collar and dimensions for this chipping
hammer.
36. Always secure tool in retainer, and place end
of tool against workpiece before turning on
hammer.
37. Disconnect machine from air supply before
changing tooling.
38. Retainer must be properly installed with coil
spring to prevent tool ejection during
operation.
39. Always grip chipping hammer firmly with both
hands.
40. The inserted tool can become hot during
operation and cause burns if touched. Allow
tool to cool before attempting removal or
maintenance.
WARNING:
This product can expose you
to chemicals including lead which is known to
the State of California to cause cancer and
birth defects or other reproductive harm. For
more
information
go
to
http://www.
p65warnings.ca. gov.
WARNING:
Some dust, fumes and gases
created by power sanding, sawing, grinding,
drilling, welding and other construction
activities contain chemicals known to the State
of California to cause cancer and birth defects
or other reproductive harm. Some examples of
these chemicals are:
•
lead from lead based paint
•
crystalline silica from bricks, cement and
other masonry products
•
arsenic and chromium from chemically
treated lumber
Your risk of exposure varies, depending on
how often you do this type of work. To reduce
your exposure to these chemicals, work in a
well-ventilated area and work with approved
safety equipment, such as dust masks that are
specifically designed to filter out microscopic
particles. For more information go to
http://www.p65warnings.ca.gov/ and http://
www.p65warnings.ca.gov/wood.
