background image

 

5

4.0

  Specifications  

 

 

Model number .................................................................................................................................................... JDC-501 
Stock numbers: 
 Dust 

collector 

.................................................................................................................................................. 414700 

 

Replacement filters (set of 2) .......................................................................................................................... 414705

 

 

 

Motor and electricals: 
 

Motor type ................................................................................ totally enclosed fan cooled, induction, capacitor start

 

 Horsepower 

...................................................................................................................................... 1.5 HP (1.1 kW) 

 Phase 

............................................................................................................................................................... single 

 Voltage 

............................................................................................................................. 115/230V (prewired 115V) 

 Cycle 

.................................................................................................................................................................. 60Hz 

 

Listed FLA (full load amps) ................................................................................................... 15A(115V) / 7.5A(230V) 

 Start 

capacitor................................................................................................................................ 300MFD/  125VAC 

 Run 

capacitor............................................................................................................................................. 30

μ

f/250V 

 On/off 

switch .....................................................................................................  magnetic,  with removable safety key 

 Motor 

speed 

...............................................................................................................................................   1450RPM 

 

Power cord length .................................................................................................................................. 6 ft. (183 cm) 

 

Power plug installed .............................................................................................................................................. yes 

 

Recommended circuit size

1

 ............................................................................................ 20A for 115V; 15A for 230V 

 

Recommended fuse/breaker size

1

 .................................................................................... 30A for 115V; 20A for 30V 

 Noise 

emission ...................................................................................................... 75 dB at 5 ft. (152.4 cm) from fan 

 

 

Materials: 
 Cabinet 

............................................................................................................................................................... steel 

 Impeller 

and housing .................................................................................................................. steel (non-sparking) 

 Casters 

.................................................................................................................................................. polyurethane 

 Filters 

............................................................................................................................................... micro  steel mesh 

 

 

Other: 
 Maximum 

capacity .................................................................................................................... 490 cfm (13.88 cmm) 

 Maximum 

hose 

velocity ........................................................................................................... 5610 fpm (1710 mpm) 

 Number 

of 

filters 

....................................................................................................................................................... 2 

 

Filter size ..................................................................................................19”L x 9.5”w x 2”Thk (483 x 241 x 51 mm) 

 Filter 

efficiency .................................................................................................................... 99% of 5 micron particles 

 

Number of dust ports ................................................................................................................................................ 2 

 

Dust port outside diameter ........................................................................................................................ 3” (76 mm) 

 

Dust port outside diameter with adaptor ................................................................................................... 2” (50 mm) 

 Casters 

..................................................................................................................... 

2-1/2” (64 mm) diameter, swivel 

 
Dimensions: 
 Dimensions, 

shipping 

........................................................................... 32” L x 28”W x 30.9”H (813 x 711 x 785 mm) 

 Dimensions, 

assembled .................................................................. 30.5”L x 31.5”W x 31.5”H (775 x 800 x 800 mm) 

 Impeller 

diameter .................................................................................................................................. 11” (279 mm) 

 

Weights: 
 Net 

........................................................................................................................................................ 157 lb (71 kg) 

 Shipping 

............................................................................................................................................... 192lb  (87.2kg) 

 

1

 subject to local and national electrical codes.        

  

 

 

 

The specifications in this manual were current at time of publication, but because of our policy of continuous 
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring 
obligations.

 

Summary of Contents for JDC-501













Reviews: