background image

 

30. Do not stand on the machine. Serious injury 

could occur if the machine tips over. 

31. 

Never leave the machine running 
unattended. Turn the power off and do not 
leave the machine until it comes to a 
complete stop. 

32. Remove loose items and unnecessary work 

pieces from the area before starting the 
machine. 

 

 

 

 

SAVE THESE INSTRUCTIONS 

 

 

Familiarize yourself with the following safety notices used in this manual: 

 This means that if precautions are not heeded, it may result in minor injury and/or 

possible machine damage. 

 This means that if precautions are not heeded, it may result in serious injury or possibly 

even death. 

 

 

WARNING:

 Some dust, fumes and gases 

created by power sanding, sawing, grinding, 
drilling, welding and other construction 
activities contain chemicals known to the 
State of California to cause cancer and birth 
defects or other reproductive harm. Some 
examples of these chemicals are: 

  lead from lead based paint 

 crystalline silica from bricks, cement and 

other masonry products 

 arsenic and chromium from chemically 

treated lumber 

Your risk of exposure varies, depending on 
how often you do this type of work. To 
reduce your exposure to these chemicals, 
work in a well-ventilated area and work with 
approved safety equipment, such as dust 
masks that are specifically designed to filter 
out microscopic particles. For more 
information go to http://www.p65warnings.ca. 
gov/ and http:// www.p65warnings.ca.gov/ 
wood. 

 

WARNING:

 This product can expose you 

to chemicals including lead which is known to 
the State of California to cause cancer and 
birth defects or other reproductive harm. For 
more information go to http://www. 
p65warnings.ca. gov. 

Summary of Contents for PH-24T













Reviews: