background image

 

4

Introduction 

This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model 
SLT-1100H Jumbo Scissor Lift Table. This manual contains instructions on installation, safety precautions, 
general operating procedures, maintenance instructions and parts breakdown. This machine has been 
designed and constructed to provide consistent, long-term operation if used in accordance with instructions set 
forth in this manual. If there are any questions or comments, please contact either your local supplier or JET. 
JET can also be reached at our web site: www.jettools.com. 

 

Specifications 

Model Number ......................................................................................................................................... SLT-1100 
Stock Number ............................................................................................................................................. 140780 
Capacity (lbs) ................................................................................................................................................. 1,100 
Table Size, L x W (in) ............................................................................................................................ 63 x 31-1/2 
Maximum Height (in) ........................................................................................................................................... 36 
Minimum Height (in) ...................................................................................................................................... 11-1/8 
Handle Height (in) ............................................................................................................................................... 39 
Strokes to Reach Maximum Height ..................................................................................................................... 33 
Wheel Diameter (in.) ............................................................................................................................................. 5 
Overall Dimensions, L x W x H (in) ......................................................................................... 73-1/2 x 31-1/2 x 39 
Net Weight (lbs) ................................................................................................................................................ 273 
Shipping Weight (lbs) ........................................................................................................................................ 372 

 

The above specifications were current at the time this manual was published, but because of our policy of 
continuous improvement, JET reserves the right to change specifications at any time and without prior notice, 
without incurring obligations. 

 
 

 

Summary of Contents for SLT-1100













Reviews: