8
Introduction
This manual is provided by JET Equipment covering the safe operations and maintenance
procedures for Models VSF-14-1 and VSF-14-3. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown.
This machine has been designed and constructed to provide years of trouble free operation if used in
accordance to instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our
web site: www.wmhtoolgroup.com.
Specifications
Model
VSF-14-1
VSF-14-3
Blade Speeds (SFPM)
70, 140, 280, 580
70, 140, 280, 580
Height Capacity (max./in.)
14-1/2
14-1/2
Throat Capacity (max./in.)
8-1/2
8-1/2
Table Size (in.)
18-1/2 x 30-1/2
18-1/2 x 30-1/2
Table Height (in.)
30
30
Blade Wheel Diameter (in.)
14
14
Blade Length (approx./in.)
120
120
Blade Width (in.)
1/8 min. – 1 max.
1/8 min. – 1 max.
Floor Space Required (in.)
40L x 30-1/2W x 63H
40L x 30-1/2W x 63H
Motor
1HP, 1Ph,
115/230V, 60Hz
1HP, 3Ph,
230/460V, 60Hz
Net Weight (lbs.)
551
551
Standard Features
•
Welded frame and base of heavy gauge steel
•
Swivel vise with scale for miter cuts
•
Heavy duty precision ground cast iron table
•
Four blade speeds (70, 140, 280, 580)
•
Hydraulic feed control
•
Counterweight for feed control
•
Upper guide bar adjustment
•
Guide rollers accept blade sizes: 1/8”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4” and 1”
Standard Equipment
•
Four foot pads
•
Work light
•
Chip tray
•
Miter gauge
•
Extension roller
•
5/8” Bi-metal blade
•
Blade speed and pitch selector
•
Conveniently located control panel
Figure 2: Specifications