3 of 17
1.
GENERAL SAFETY INSTRUCTIONS
•
The extractor is controlled via the
JetBlack Safety Cleaning Booth and will operate automatically without
warning. Extreme caution is advised when carrying out any maintenance to the equipment. All electrical
connections should be removed from the Cleaning Booth.
•
This machinery is for use in heavy industrial current installations. During operation this unit has high speed
rotating parts. For this reason, unauthorised removal of the necessary covers, improper use, incorrect
operations or insufficient maintenance could lead to severe personal injury or/and damage of the unit.
•
If the connecting cable to the blower is damaged, there is a risk of death due to an electric shock. Such defects
must be eliminated immediately.
When operating the unit, always wear:
▪
Eye protection
▪
Ear protection
▪
Safety footwear
▪
Dust mask suitable for the media being removed.
Never:
▪
Run the extractor with any of the guards disconnected.
▪
Run the extractor with filter disconnected.
▪
Run the extractor with extraction hose disconnected.
Those responsible for the safety of the installation must ensure that:
•
Only qualified personnel are entrusted to work on the unit.
•
These persons always have at their disposal the operating instructions and other product documentation
supplied when they do such work, and that they undertake to follow consistently any such instructions.
•
Non-qualified personnel are not permitted to work on the unit.
Qualified personnel are persons who, have had training, experience and knowledge of relevant standards,
specifications, accident prevention regulations and operating conditions, have been authorised by those responsible for
the safety of the plant to carry out the necessary work and who can recognise and avoid possible dangers. IEE and
other relevant regulations should also be observed.
It is assumed that the basic planning work for the installation and all work concerning transport, assembly,
commissioning, maintenance and repair is done by qualified personnel or checked by responsible skilled personnel.
Note should be taken of the following:
•
Technical data and information on permissible use (assembly and connection summaries, operating
conditions etc) which are contained in the operating/instructions and motor rating plates.
•
General safety regulations.
•
The proper use of tools, lifting equipment and safety regulations.
Summary of Contents for JS-606 Series
Page 1: ...PERSONNEL CLEANING BOOTH EXTRACTOR ACM 0002 Issue 3...
Page 8: ...8 of 17...
Page 9: ...9 of 17...
