Sequence of Operation(s)
Start-up:
1.
Ensure there is no obstruction and potential interference with any object in
the fan operation space.
2.
Confirm the input power supply is correct and meets the product’s
requirement.
3.
Turn the speed knob to the minimum position
4.
Turn on the fan, turn the control switch from STOP position to RUN
position
5.
After the fan starts, adjust speed knob to get the appropriate speed and
best effect
Shut-down:
1.
Stop device by turning the power switch from RUN to position STOP.
2.
Gradually increase or decrease the speed of the fan using the speed
control knob.
IMPORTANT NOTE
:
Power outage is prohibited during the fan normal operation.
In case of a power failure and reversion, the Engine or Eurus HVLS ceiling fan
system starts automatically as the power knob is still at RUN position. To prevent
motor damage, ensure that the power switch is turned to STOP position in the
event of a power failure.
Maintenance
NOTE
Risk of fire, electric shock, or injury to persons during cleaning, servicing and user
maintenance. Disconnect the fan system from the power supply before servicing.
Preventive Maintenance
Our product design is maintenance-free, but in order to ensure the long life of the
normal operation, the fan should also be maintained regularly, especially when
applied in harsh environments.
➢
All fan hardware should be periodically checked and tightened with the
appropriate torque values.
➢
Check safety cable and guy cables for fraying or damage.
➢
Remove dust from fan blades and motor every six months.
➢
Ensure the fan is not exposed to direct contact with water.
