knowledge, unless they have been given supervision or instruction
concerning use of the equipment by a person responsible for their safety.
b.
Children should be supervised to ensure that they do not play with the
equipment.
PROHIBITIONS
To reduce the risk of fire, electric shock, or injury to persons, observe the
following:
a.
Installation work and electrical wiring must be done by qualified person(s)
in accordance with all applicable codes.
b.
When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
c.
The installation of an Engine or Eurus HVLS Fan must be in accordance
with the requirements specified in this installation manual and with any
additional requirements set forth by the NZECP, and all local codes. Code
compliance is the responsibility of the end user.
d.
The fan controllers contain high voltage capacitors which take time to
discharge after removal of mains supply. Before working on the fan
controller, ensure isolation of main supply from line inputs at the fan
controller board. Wait three minutes for capacitors to discharge to safe
voltage levels. (notes: the displayer blackness is not the mark that the
voltage has reached the safety level). Failure to do so may result in injury or
death.
e.
Do not connect the fan to a damaged or hazardous power source. Only
qualified technician should attempt to resolve electrical malfunctions.
Contact Jet Black Fan Systems for questions regarding the electrical
installation of the fans.
f.
Risk of fire, electric shock or injury to persons during cleaning and
maintenance. Disconnect the fan system from the power supply before
servicing.
g.
Do not insert foreign objects between rotating fan blades.
CAUTIONS
a.
Guy cables must be installed as per the instructions provided in this
manual, failure to do so may result in damage or injury and will void the
product warranty.
b.
Do not bend the fan blades when installing or servicing the fan.
c.
The installation of this fan requires the use of some power tools. Follow the
safety
procedures found in the owner’s manual for each of these tools.