37/ 53
Quick Start Guide
1) Selecting a new model and naming it
1)
With the fuel station switched on, press the
I
Stop
key once briefly to access the Run menu.
2)
Press and hold the
key and choose a free model location
.
3)
Turn off the fuel station (press and hold
I
Stop
key for at least 1.5 seconds)
4)
Enter/define the model name by following the instructions on page 39.
(
Press and hold the
key when switching on to access the model name setting function).
2) Defining refueling settings
1)
With the fuel station switched on, press the
I
Stop
key once briefly to access the Run menu.
2)
Check whether the desired model is displayed in the upper line.
If not, select the desired model while holding down the
key with the
keys!
3)
Press and hold the
key and press
once to select the "Fill-Settings" menu.
4)
Now make the settings for the model tank (see also page 27):
You can scroll through the menu with the
keys. To change a value, press and hold the
key and with the
keys set the value.
3) Selecting model and start fueling process
1)
With the fuel station switched on, press the
I
Stop
key briefly once to access the Run menu, or
press
repeatedly until the Run menu is displayed.
2)
Check whether the desired model is displayed in the upper line.
If not, select the desired model while holding down the
key with the
keys!
3)
Make hose connections to the model!
4)
Press the
Fill
key to start the automatic refueling process.
5)
If necessary, the fueling process can be terminated at any time by pressing
I
Stop
.
