39/ 53
Changing the model name (fill program name)
To change/set the current model name, proceed as follows:
First switch off the fuel station!
Then:
Press and hold the
key and then switch on the fuel station by pressing
the
I
Stop
key again.
Now the setting function for changing the model name is selected, the display shows e.g.:
The modification/editing of the model name displayed in the bottom line must then be carried out as
follows:
Use the
keys to move/position the cursor horizontally
To change the character at the cursor position
press and hold
the
key and now change/set the
character with the
keys.
Tip:
To quickly jump to the letters "a"/"A" and digits "0" and the space "", you can repeatedly press the
Fill
key while holding down the
key! This can save some time for the otherwise necessary "scrolling
through" of the characters.
In this way, the entire model name can be freely set/defined.
To save/terminate the function finally press the
key. This saves the setting. The system then goes
into normal operation.
