40/ 53
Changing the container name
Immediately after switching on, the so-called "Container Name" is displayed in the bottom line.
This freely definable name should be used to identify the contents of the fuel container (e.g. Jet-A1,
smoke oil, 4-stroke fuel etc.).
When delivered, the name of the container is "Jet-A1 + 5%Oil".
To change/set the container name, proceed as follows:
First switch off the fuel station!
Then: Press and hold the
key and then switch on the fuel station by additionally pressing the
I
Stop
key.
Now the setting function for changing the container name is selected, the display shows e.g.:
Changing/editing the container name displayed in the bottom line is then possible as follows:
Use the
keys to move/position the cursor horizontally
To change the character at the cursor position
press and hold
the
key and now change/set the
character with the
keys.
Tip:
To quickly jump to the letters "a"/"A" and digits "0" and the space "", you can repeatedly press the
Fill
key while holding down the
key! This can save some time for the otherwise necessary "scrolling
through" of the characters.
In this way, the entire container name can be freely set/defined.
To save/terminate the function finally press the
key. This saves the setting. The system then goes
into normal operation.
