Set the System Setup
1. When in the Network Viewer Console, click the
button to enter the
System Setting
page.
2. Click the
System Setup
button to enter the System
Setup page. (See the sample screen as
in
A
above.)
3. Set the
Authority Setup
、
Sequence Setup
、
Motion Mode Setup
and
Push Mode Setup
functions of this page.
4. Click the
Apply
tag to proceed.
Set the Recording Setup
1. When in the Network Viewer Console, click the
button to enter the
System Setting
page.
2. Click the
Recording Setup
button to enter the Recording
Setup page. (See the sample
screen as in
B
above.)
3. Charge the
Date
Format
if and as necessary.
4. Set the disk full to over write
to in order enable the
Disk Full
Over Write
setting area.
5. Charge the image file path if and as necessary.
6. Click the
Apply
tag to proceed.
Set the Schedule Setup
1. When in the Network Viewer Console, click the
button to enter the
System Setting
page. (See the sample screen as in
C
above.)
2. Click the
Schedule Setup
button to enter the Record Schedule page.
3. If you wish to activate recording for a certain period of time, you can either enter that
particular time period in the
Hour : Minute
box given at the top, or you can drag your
mouse to cover the entire specified time period in the column below. You can select only
one time period per day.
4. When all required settings are completed, click the
Apply
tag to proceed.
63
