computer radio control system
EN
10.6 Telemetry Data Logging
10.4 System Backup
Data backup is as easy as the standard backup you can perform on
your PC. You can save all your data onto a PC hard drive or CD. The
saved data will, of course, reflect your last transmitter configuration
and model settings. The data recovery is as easy as copying your
backed up files back to the transmitter.
DC/DS transmitters can be very simply used as a joystick interface for
your PC. Connect your transmitter to a PC with the USB cable. Your
operating system will identify the transmitter as an HID (Human
Interface Device) gaming device.
All telemetry data is stored on the internal SD card in the “Log”
directory file. Telemetry data files are easily identifiable as .log files.
The data files use date stamps with the “year/month/day”
configuration. Flight logs can be viewed on the PC using the JETI
“Flight Monitor” software.
10.5 PC Joystick
10.7
Copying models between the transmitters
Configuration of all models in the transmitter are stored on the
internal
SD card
in the directory
/Model/
. When you copy the
selected model from one transmitter to another, simply copy the
*.
jsn
file again to the
/Model/
directory of the second transmitter.
It is important that the two transmitters may not have the
same software equipment, so it is possible that the
configuration of the activated modules will not match
each other. In this case it is necessary to check the
individual functions of the model, since an attempt to load
the model by another transmitter may end up with error
message.
Note:
65
Summary of Contents for DC-14 II
