BarDIMM Pro & BarDIMM Box – Intelligent
Barcode Printing System
©2004-2006 Jetmobile
Page 14
There is one version of BarDIMM for every HP LaserJet / Business Ink Jet printer model,
and the BarDIMM board is not cross-printers compatible. Make sure you have specified
the model with your BarDIMM order. LaserJet / Business Ink Jet models are not
compatibles together, ie
a BarDIMM for LJ4300 can not work in a LaserJet 9000mfp
.
ON PRINTERS WITH HARD DISK, MAKE SURE YOU REMOVE BARDIMM
FROM THE PRINTER IF YOU NEED TO REFORMAT THE PRINTER DISK.
IF YOU KEEP BARDIMM PRO IN THE PRINTER IT WILL BE ERASED.
Note
: If you erase BarDIMM Pro DIMM by mistake, please contact your Jetmobile VAR
for information on BarDIMM media recovery.
4-2 – Testing BarDIMM Box
This sub-chapter is only applicable to BarDIMM Box.
•
You can test the BarDIMM box by sending to it a BarDIMM test file. This can easily
be done using the JetSpool utility. BarDIMM test files and JetSpool utility are available
on the drivers section of the Jetmobile web site
•
You can manually send a BarDIMM test file to a BarDIMM box using the following
commande line:
lpr –S <IP Address> –P raw <filename>
where <IP Address> is the IP address of the BarDIMM Box
<filename> is the name of the test file to send
If a MEMORY OVERFLOW error message appears on the printer front panel (or if error
LEDs blink on some printers), or if text replaces the barcodes, the BarDIMM Box is not
working properly. Please contact your BarDIM Box reseller and provide the Log file
information to ease troubleshooting.
