POWER INDICATOR & BINDING MODE
The power button on the right side of the battery case includes an LED indica-
tor light, meant to help you understand how much charge is left in your battery.
GREEN LED:
100% - 70%
BLUE LED:
70% - 30%
RED LED:
30% - 0%
FLASHING RED LED:
Low voltage
When the Power Indicator is red, please charge the battery immediately.
If your remote control is not
connecting, or if you need to
connect a replacement re-
mote control, you must enter
Binding Mode to wirelessly
link the remote control to the
electric skateboard.
To enter Binding Mode, first ensure that the Remote Power Switch is turned
to Off, and that the electric skateboard is turned off. Set the speed switch to
Slow, and set the remote control to Backward.
Turn the electric skateboard on, and press the Bluetooth/”Binding” Button.
Then, pull the Accelerator/Brake switch down to Brake and hold for three
seconds. Turn the Remote Power Switch to On and wait a few seconds. When
the Bluetooth Indicator flashes, you have successfully connected the remote
control to the electric skateboard.
6
MODEL#: JEP400/VERSION#: 1
